Tuning is the process of harmonizing standards and determine the frequency of the frequency of inter-stringed musical instrument strings on a guitar for example. On a guitar this process is done by adjusting the string tension via the player (tuning machines) in the head (Head) guitar. Standard tuning on guitar is EADGBE, to obtain a standard frequency such as A can be used as a benchmark a garputala A or with other instruments. Ways the easiest and most practical to use an electronic tuner Chromatic.
Tala A Fork Ring tones 440 Hz and attach the handle to the body of the guitar so that audible tones A. Press fret 5 string 1 (the thinnest) compare its tone if not tighten / loosen the strings. Learned again to check if you have the same tune or not.
After getting the same tone and then pick one without the push strings (open strings). simultaneously plucking the strings 2 at fret 5, equal voice.
- Plucked strings, then squeeze the second without picking strings on fret 4 3 equal voice
- Plucked strings, three strings without a squeeze then picked fourth in five equal voice fret
- Plucking the strings 4 without squeeze then picked 5 at fret 5 string equal voice
- Strings 5 string without plucking the strings and then squeeze in the sixth fret five equal voice
- Tuning is completed
The weakness in this way the possibility of irregularities in the tone of the strings 3,4,5, and 6 because the strings are not directly aligned with the string first.
Above step is very easy, but for a beginner guitarist manual tuning guitar is hard work but it can be overcome with diligent practice, so knowing how does tuning sound two strings, which sounded the same fruit that has the same tone, moreover also can be used to train our hearing temtang characteristic tones.
Tidak ada komentar:
Posting Komentar